Hall Effect Current Sensors and Power Magnetics
Tamura Corporation of America is a leading global supplier of Open Loop & Closed Loop Hall Effect Current Sensors and Custom Power Magnetic components to the Global Industrial and Power Electronics Marketplace. Our markets include Welding, Traction, AC& DC Drives, UPS, and, Alternative Energy... Read more »
HDI Amplified Pressure Sensors
The First Sensor HDI sensors offer precision pressure measurement from 10 mbar up to 5 bar. The HDI series performs precision digital signal conditioning to achieve ultra high total accuracies. An internal ASIC compensates sensor offset, temperature effects and non-linearity to allow for an... Read more »
HDI PCB
HDI PCB's are multilayer boards in which conductor patterns are created on insulating layers, and then layers are stacked one by one using laser technology, plating technology, etc. They allow for higher density and integration than typical multilayer through-hole boards and are used in devices... Read more »
HDI Printed Circuit Boards
Copper Inlay PCB's are useful for heat dissipation of heat-generating components. Heat dissipation is achieved by pressing a copper block (copper inlay) directly under the heat-generating component. Because heat is not dissipated over the entire board, there is the same degree of freedom in wiring... Read more »
Heat Master Shields
a stainless steel shield with a lined outside design pattern sandwiched inside is a 2500°F. insulation, the shield is pinched over twice with grommets along all sides, shipped to you flat you bow it to shape and install in minutes with stainless straps. Strap 8", 14" or 26" sizes. No More Burns! No... Read more »
Heat Pipe Assemblies
Our heat pipe solutions signifi cantly reduce the footprint of power conversion systems thanks to performances that approach those of liquid cooling technology. That means the unit is a stand-alone and offers vital benefits to the user: less space required, lighter weight, maintenance-free, and... Read more »
Heat Pipes, Heatsinks, Heat Dissipation
Heat sinks act as radiators in a system. As a result, it transfers the heat generated by an electronic or a mechanical device. In other words, air or a liquid coolant is often used to dissipate hear away from the device. CSI manufactures heat sinks mainly made from aluminum or copper. Read more »
Heat Sink Compounds
AOS Heat Sink Compound: 52022 (AOS 300) AOS Heat Sink Compound: 52055 (AOS 340) AOS Heat Sink Compound: 52051 (WC HTC) AOS Heat Sink Compound: 52056 (HTC 35) AOS Heat Sink Compound: 52050 (HTC 80) AOS Heat Sink Compound: 52060 (HTC 100) AOS Heat Sink Compound: 52070 (HTC 140) AOS Heat Sink... Read more »
Heat Sink w/Pipes and spreader bars
Tran-tec uses SolidWorks and GibbsCAM to program complex parts requiring channels, pockets for copper spreader bars, tapped hols and other features. Read more »
Heatsinks and Cold Plates
PSL Assemblies Limited can build any size and design of high density bonded-fin heatsink, extruded-profile heatsink and liquid-cooled plate. Based in the UK, we export globally, manufacturing any volume of heatsinks from small runs through to large scheduled batches. Materials provided include... Read more »
Hermetic
• Affordable price, reasonable delivery • Leakage rate of 5 x 10-9 mbar.l/s @ vacuum of 1.5 x 10-5 atm • Standard density and high density D-subminiature feed-throughs intermateable with IEC 60807-2, IEC 60807-3 and M24308 D-subminiature connectors • Combination D-subminiature... Read more »
HFD series
Dual output Ultra Low Noise AC/DC Power Supply 30W 12/15Vout 2-3mVp-p Ripple Noise RoHS free 76-78% efficiency UL file#: E237238 Read more »
HFS150A series
Daitron offers HFS150A series Ultra Low Noise Switching Power Supply specifically designed noise critical applications in industies. Widely accepted universal input range and 5V, 12V, 15V, 24V, 30V and 48V output option available. RoHS and vinylchrolide free. Certified Medical (60601) and UL... Read more »
HFS30 series
Ultra Low Noise model, universal input range 30W 30W 5/12/15/24/48 Vout 3-5mVp-p Ripple Noise RoHS free 74-83% efficiency UL file#: E237238 Read more »
HFS50 series
Ultra Low Noise model, universal input range 50W 50W 5/12/15/24/48 Vout 3-6mVp-p Ripple Noise RoHS free 75-83% efficiency UL file#: E237238 Read more »
High Performance Thermal Greases- White Ice Series
White Ice series are silicone based thermal greases engineered with special binding agents to reduce bleed and oil separation. These compounds offers excellent wetting properties, spreadability and the low viscosity formulation makes them easy to apply to thin bond line thickness for minimum... Read more »
High Ripple Current 400,800,1000VDC Capacitor
Reference standards : IEC 61071-60068 Dielectric : Polypropylene film Construction : Extended metallized film. Dry construction, Non-inductive type Coating : Polyester tape wrapping, UL94V-0 resin end fill Leads: Tinned copper wire ELECTRICAL CHARACTERISTICS Operating temperature range(case) : -... Read more »
High Ripple Current SLA-400,800,1000VDC Capacitor
Reference standards : IEC 61071-60068 Dielectric : Polypropylene film Construction : Extended metallized film. Dry construction, Non-inductive type Coating : Polyester tape wrapping, UL94V-0 resin end fill Leads: Tinned copper wire Electrical Characteristics: Operating temperature range(case) : -... Read more »
High Voltage Differential Probes
Our probes are not copies nor inspired by any of the high voltage differential probes available on the market. They are unique. We are proud to say that we succeeded in creating a superior product that our customers can really appreciate. Read more »
High Voltage Disc Capacitor
Leaded - Military & Commercial Leaded - Low Cost Commercial Leaded - Negative Coefficient Low Loss Leaded - Space Level Leaded - Screw Terminal - Military & Commercial Bare Disc Bare Rectangular Leaded - High Temperature 200c Read more »
High Voltage MS 4000-15000VDC Capacitor
Reference standards : IEC 61071-60068 Dielectric : Polypropylene film Construction : Extended metallized film Coating : Polyester tape wrapping, UL94V-0 resin end fill Leads: Tinned copper wire Electrical Characteristics Operating temperature range(case) : - 40 to + 85 °C Capacitance : 0.0015 to... Read more »
High Voltage Multilayer Capacitors
Leaded - Military & Commercial Leaded - Space Level Surface Mount - Military & Commercial Surface Mount - Space Level Chip - Military & Commercial Chip - Space Level Leaded DSCC Qualified 87043 | X7R (1kV) 87046 | NPO (1kV) 87040 | X7R (2kV) 87114 | NPO (3kV) 87047 | X7R... Read more »
High Voltage Multilayer Ceramic Capacitors - Leaded - Military & Commercial
Available with ultra stable Class I, NPO and stable Class II, X7R dielectric materials, these capacitors are ideally suited for timing/precision circuitry, energy storage, DC blocking, snubbers, transient suppression, decoupling, resonators, and EMI filtering applications. Read more »
High Voltage Multilayer Ceramic Capacitors - Surface Mount - Military & Commercial
Available with ultra stable Class I, NPO, and stable Class II, X7R dielectric materials, these capacitors are ideally suited for timing/precision circuitry, energy storage, DC blocking, snubbers, transient suppression, decoupling, resonators, and EMI filtering applications. Read more »
High-quality Film Capacitors for DC-Link
Reference standards : IEC 61071-60068 Dielectric : Polypropylene film Construction : Dry construction, filled by solid resin, Non-inductive type Coating : Self extinguishing plastic case UL94V0 Leads: Tinned copper wire Electrical Characteristics: Operating temperature range(case) : - 40 to + 85... Read more »
HIGH-SPEED TERMINAL INSERTION MACHINES
As a global manufacturer of flexible insertion machines and interconnect components, Autosplice offers a full range of automated assembly equipment tailored to your manufacturing requirements. From fully automated dual-head inline systems to precision bench-top machine, our quick change module... Read more »
HMI's & Operator Interfaces
Entry Level HMI's Fieldbus Modules & Other Exor Accessories Graphical Workstations Handheld HMI's HMI Communication Software Industrial Computers/Monitors Industrial PC Solutions Marquees Operator Interfaces Read more »
Horizontal Three Position Slide Switch 4 Pin
Horizontal three-position slide switch (SP3T) with 4 pins and through-hole mounting. It features a compact design and is available with different handle height options to suit various applications. Rated at DC 30V 0.1A, ensuring stable performance in low-power electronic circuits. Features a 1P3T... Read more »
House of Batteries
Design and manufacturing of custom battery packs in every battery chemistry since 1965. We assemble over 200K custom battery packs a month, we have a large Engineering design Dept. to design & produce the most complex battery packs using batteries from Panasonic, Sanyo, LG Chem, Duracell, Enersys,... Read more »
HPM IGBT Driver
The HPM IGBT driver is a single channel driver with an interface for 3.3V, 5V or 15V logic levels. It mounts easily onto an IGBT while monitoring desaturation and regulating gate-emitter voltages. Read more »
HYAMP III
HYAMP III is a manual Ground Bond tester that features an enhanced graphic LCD. It consists of three models. The 3130 provides 30 Amps of Ground Bond test current, the 3140 provides 40 Amps of Ground Bond test current and the 3160 provides 60 Amps of Ground Bond test current. All models can be used... Read more »
HYPERSIM Power System Real-Time Digital Simulator
HYPERSIM is the most powerful and intuitive power system simulator for utilities, R&D centres and manufacturers. HYPERSIM is the only real-time digital simulator with the power to simulate and analyze very large-scale power systems with more than 2000 three-phase buses. It is used for factory... Read more »
Hypot III
Hypot® III is a bench top Dielectric Withstand tester with an enhanced Graphic LCD and entry-level automation with an RS-232 interface. The Hypot® III family consists of three models: the 3705, the 3765, and the 3770. The 3705 is an AC Hipot tester, the 3765 is an AC/DC Hipot Tester, and the 3770... Read more »
HypotMAX
The HypotMAX series is a family of high voltage and high current electrical safety compliance analyzers. The 7700 is a 3-in-1 model that provides 500VA AC Hipot, DC Hipot, and Insulation Resistance testing. the 7704 is a 4-in-1 model that adds a 30 Amp Ground Bond testing to the functionality of... Read more »
HypotULTRA III
HypotULTRA III is a fully-automated dielectric analyzer for Safety Agency production line testing. The HypotULTRA III family features two models. The 7620 is an AC Hipot with an optional 4 or 8 channel internal scanning matrix. The 7650 is a 3-in-1 system that performs AC Hipot, DC Hipot and... Read more »
