Products by Streuter Fastel Timtel

M45 Phase Change Thermal Film offers a high thermal conductivity of 5.5 W/m-K and ideal for a range of thermal management device application for power modules - IBGT, LED, microprocessor-heat sink setups within the consumer, medical, automotive and power electronic markets

XoPhase 45 offers a thermal conductivity of 3.0 W/m-K within a free standing 45C phase change thermal film designed to provide reliable and efficient heat transfer for a variety of electronic device applications including LED, thermoelectric modules or microprocessor/sink assembly. Available...

Diaphase 60 is high performance dielectric phase-change material which utilizes Kapton® MT polyimide film to act as a thermally conductive carrier in order to deliver a uniform thickness coating of Diaphase 60 phase-change thermal compound on both sides. Through the development of this unique...

Streuter Fastel Timtel's line of thermally conductive silicone films are available in a range of thermal conductivity performance choices (1.2 W/m-K to 8 W/m-K), thicknesses (0.20mm to 0.45mm) and tack configurations to meet a wide range of thermal management and pad installation requirements....

Streuter Fastel Timtel's product line of SILTEL Thermally Conductive and Insulating Gap Pads offer a range of thermal conductivity performance choices (1.5 W/m-K to 11 W/m-K), softness/compliance ratings and pad thicknesses. SILTEL Pads are ideal solutions for applications where efficient heat...

SILTEL NSG a silicone free electrically insulating thermally conductive gap pad ideal applications where volatile siloxanes is a concern and the need to provide an efficient heat transfer of a gap is required. SILTEL NSG is optimal for electronic applications where thermal transfer over large...

FastelTack T-Series is a thermally conductive pressure sensitive adhesive tape designed to provide efficient thermal transfer between device and heat sink packaged with the capability of quick assembly. T-Series is available standard as a 0.05mm or 0.10mm thick free-standing film. Additional...

UltraPhase 60 is the latest generation of dielectric phase change thermal interface material offering a significant increase in overall thermal performance packaged with same reliable dielectric strength as our DiaPhase 60 material. Built off the backbone of Dupont’s Kapton MT+ (plus) offering...

Building upon the thermal performance and dielectric strength of our standard Diaphase product line, Diaphase 60A is built with a 0.5 mil (0.013mm) repositionable pressure sensitive adhesive backing to allow for a pre-applied pad function for installation. DiaPhase 60A still utilizes on one...

IntraPhase 50 is a graphite filled phase-change thermal interface material offering high performance heat transfer packaged with a clean drop-in-place assembly solution. IntraPhase 50 offers low thermal impedance within a range of pressure requirements which makes it an ideal solution for a range...

Similar in design to its IntraPhase 50 counterpart, IntraPhase 60 offers all the same performance offerings but designed with a higher phase change temperature of 60C for power devices with higher operating temperatures. IntraPhase 60 is a graphite filled phase change thermal interface material...

Actaphase 60 is cost effective non-isolated high-performance phase-change material which utilizes an aluminum substrate to act as a thermally conductive carrier in order to deliver a uniform thickness coating of Actaphase 60 phase-change thermal compound on both sides. Actaphase 60 offers efficient...

Graphenol is a new TIM heat spreader foil that offers a handling friendly approach packaged with an ultra-high in-plane thermal conductivity of 1,500 W/m-K. Graphenol is designed to eliminate the traditional handling issues that exist within current pyrolitc heat spreading graphite foils such as...